Filter
Top Products
2
Type
1
Features
Type
1
Features
2
1
Care and Maintenance
36
Buckle Removal and Replacement
Buckle Removal
1. Turn the restraint upside down.
2. Locate metal buckle strap retainer on the underside of the restraint.
3. Pull retainer away from child restraint to loosen.
4. Turn the retainer so that the short side will go up through the slot in the restraint shell to
the upper side of the restraint.
5. Pass the retainer through the slot in cover to remove buckle from restraint.
Buckle Replacement
1. Locate the buckle slot.
2. Turn the buckle retainer so that the short side
will go through the slot in the cover and restraint
shell (Fig. 1).
3. Pull buckle away from restraint until tight, then
verify that the strap is not twisted and the release
button is facing outward.
4. Make sure the buckle retainer lies flat against the
restraint shell.
A B C D
37
Cleaning the Buckle
If a child eats and drinks while in the restraint,
the buckle may need to be periodically checked
and cleaned of any accumulated debris or dried
liquids.
1. After removing the buckle (see Buckle
Removal, page 36), thoroughly rinse, using
warm water (Fig. 1).
2. Soak, overnight if possible, using warm water to
loosen hardened drinks or food.
3. Test the buckle by fastening and unfastening
until a “click” is heard after inserting each
buckle tongue (Fig. 2). If a “click” is not heard,
repeat cleaning procedure.
4. Towel dry.
5. Do not lubricate, use solvents, abrasive cleaners,
soap or household detergents.
1
Care and Maintenance
2
Unbuckle Buckle