Filter
Top Products
If a pre-drilled hole does not exist, you will
have to drill a
5
/
16
" hole. (Be sure to wear
appropriate eye protection when drilling.)
Make sure the hole is at least 8" from the
top of the vehicle seat and no more than 3"
from the center line of the Safe Embrace
®
Convertible Car Seat.
Insert the bolt through the anchor.
Insert the end of the bolt into the hole
inside your vehicle.
From the outside of your vehicle, attach
the washer and lock nut to the end of the
bolt. While holding the bolt tight with a
wrench, tighten the lock nut securely with
another wrench. Use a silicone caulk
around the drilled hole to seal out water
and exhaust fumes.
FORWARD-FACING POSITION 1 YEAR AND UP (22 - 40 LBS.)
3"
3"
Bolt
Anchor
Washer
Lock Nut
Distance from
top of vehicle
seat and hole
is at least 8".
Car Seat
Center Line
Tether Anchor Installation
Pick-Up Truck
5
C
4
C
6
C
7
C
43
Pages odds 12/15/99 3:27 AM Page 29