Filter
Top Products
REAR-FACING POSITION BIRTH TO 1 YEAR (6 - 30 LBS.)
If you are using a vehicle seating location
equipped with a shoulder belt, you must use
only one rear-facing position locking clip
on the car seat to prevent the vehicle belt
system from loosening during use. With the
vehicle belt system tight, fit the shoulder
belt
into the rear-facing position locking
clip on the side of the car seat.
Installing Your
Car Seat in a Vehicle
8
8
REAR OF VEHICLE
29
IMPORTANT!
Your car seat is equipped with two rear-facing
position locking clips (one on each side of the
car seat). Use only one rear-facing position
locking clip to install the car seat. Use the
rear-facing position locking clip closest to
where the vehicle shoulder belt is attached
to the vehicle.
Pages odds 12/15/99 3:27 AM Page 30