Filter
Top Products
FORWARD-FACING POSITION 1 YEAR AND UP (22 - 40 LBS.)
3"
3"
If a pre-drilled hole does not exist, you will
have to drill a
5
/
16
" hole. (Be sure to wear
appropriate eye protection when drilling.)
Make sure the hole is at least 8" away from
the top and no more than 3" from the center
line of the Safe Embrace
®
Convertible
Car Seat.
Insert the bolt through the anchor.
Insert the end of the bolt into the hole
inside your vehicle.
Open the trunk of your vehicle and attach
the washer and lock nut to the end of the
bolt. While holding the bolt tight with a
wrench, tighten the lock nut securely with
another wrench.
Distance
from top of
car seat and
hole is at
least 8".
Car Seat
Center Line
Bolt
Anchor
Washer
Lock Nut
Tether Anchor Installation
2-Door and 4-Door Car
5
A
4
A
6
A
7
A
41
Pages odds 12/15/99 3:28 AM Page 31