Filter
Top Products
9
OPERATION AND PROGRAMMING
1. LCD Display and Menu System
The LED Luminaire’ProTron followings LCD Display and Menu System provides local control for accessing the
fixture’s settings:
Presets (Standard and User Defined)
Fixture Settings
Effects(Chases - preloaded and user defined)
Current Fixture Operational Status
Setting the DMX512 Address
Note: If there are multiple luminaires in a system, changes would need to be made at each LCD Menu as desired.
Upon power up, the LCD will display the main screen showing menu of ProTron LED. User can use “ ”
and “ ” to select then enter the desired function menu.
Figure 7: LCD Display and Menu System
2. LCD Display and Menu System Operation
The LCD Display Menu system consists of several categories. Upon power up, the LCD will display the main
menu automatically. There are totally 4 menus available including Preset, Chase, Settings and Status. When the
navigate and desired menu item is reached, press OK button to display the menu options and to configure the
LEFT Arrow Button
RIGHT Arrow Button
CHECK MARK(OK) Button
LCD Display
EXIT Button
To navigate and access menu settings/selections:
Step 1. Make sure unit is powered and turned on.
Step 2. Press the desired button to access menu categories.
Step 3. Use “ ” and “ ” arrow buttons to navigate through
Step 4. Make changes as desired.
Press OK button to accept changes.
the various options and settings.
menu options as required.
ProTron LED