Filter
Top Products
Press CHECK MARK(OK)button to access Preset Select.
Press CHECK MARK(OK)button to access Chase.
Press CHECK MARK(OK)button to access Settings.
Press CHECK MARK(OK)button to access Status.
Use LEFT and RIGHT arrow buttons to scroll through all presets
and select Preset x(0 thru 31).
Use LEFT and RIGHT arrow buttons to scroll through all menus,
including Chase Select, Master Intensity, Strobe Rate, Strobe
Duration and Edit Userchase.
Use LEFT and RIGHT arrow buttons to scroll through all menus.
Use LEFT and RIGHT arrow buttons to scroll through all menus.
Once at desired preset, use LEFT and RIGHT arrow buttons to
adjust parameter value as desired. Once all values are adjusted as
desired, press CHECK MARK(OK)button.
Once at desired menu, use LEFT and RIGHT arrow buttons to
adjust parameter value as desired. Once all values are adjusted as
desired, press CHECK MARK(OK)button.
Once at desired menu, use LEFT and RIGHT arrow buttons to
adjust parameter value as desired. Once all values are adjusted as
desired, press CHECK MARK(OK)button.
Once at desired menu, use LEFT and RIGHT arrow buttons to
check the related fixture information.
Press CHECK MARK(OK)button to select the desired menu among
Intensity, Strobe Rate, Duration and Effects, Zone1, Zone2,
Zone3 and Zone4.
Press CHECK MARK(OK)button to select the desired menu.
Press CHECK MARK(OK)button to select the desired menu
among General, Factory Default, DMX and Display.
Press CHECK MARK(OK)button to select the desired menu
among LED Current Level, Temperature, and Other Information.
If saving preset, press CHECK MARK(OK) button. Confirm choice.
Save preset menu option will appear. Use LEFT and RIGHT arrow
buttons to select preset number.
Settings
Status
Note: For more information about Preset, Settings and Status, please refer to “ LED Luminaire Menu Tree”
on page 11.
ProTron
To check the fixture operational status:
..Preset Edit
1. Intensity
..Chase
1. Chase Select
Settings
1. General
Status
1. LED Level
Chase
10
ProTron LED
3.