Filter
Top Products
7
Table 2: ProTron LED Luminaire (IP65 Rated Models) AC Input Connections
Figure 3: ProTron LED Luminaire AC Input & Output Connections
CAUTION: In the event the AC input cable of this luminaire is damaged, it must be replaced, by the user, with an
approved cable through an Authorized Dealer or Service Center.
3. Connecting to the DMX512 Network
Basic DMX512 installation consists of connecting multiple ProTron LED Luminaires together (up to 32 luminaires)
in "daisy-chain" fashion. A cable runs from the control console (or DMX512 control source) to the DMX connector
on the first LED Luminaire. ProTron the first unit to a DMXAnother cable runs from the other DMX connector on
connector on the next ProTron LED Luminaire (or DMX512 device to be controlled).
Figure 4: ProTron LED Luminaire DMX512 Input / Output Connections
Back of Unit
ProTron LED
Note: For more information on DMX512 networking and systems, refer to "Additional Resources for DMX512" on
page 1. For ProTron LED Luminaire DMX Mapping, refer to "DMX CONTROL" on page 13
.
DMX512 /
AC Input
RDM Input
DMX512 /
AC Output
RDM Output