Filter
Top Products
DMX CONTROL
This section contains information for operating the luminaire using DMX control in Single Channel, Three Channel,
Four Channel, 16-bit Control and Zone Mapping modes. For Menu options and detailed information, see "LCD Display
and Menu System" on page 9.
Note: These tables assume a DMX start address of 1. When a different starting address is used, this address becomes
channel 1 function and other functions follow in sequence.
1. Single Channel Mode
2. Three Channel Mode
Table 3 provides DMX channel mapping of all DMX512 control values when the ProTron LED Luminaire is in Single
Table 4 provides DMX channel mapping of all DMX512 control values when the LED ProTron Luminaire is in Three
mode (as set by the luminaire’s menu system).Channel
Channel mode (as set by the luminaire’s menu system).
Table 3: ProTron LED Luminaire DMX Channel Mapping (Single Channel Mode)
Table 4: ProTron LED Luminaire DMX Channel Mapping (Three Channel Mode)
1
1
DMX
8 bit control for Intensity of LED settings.
Strobe's duration, Range is 0-255
White light mode (when strobe rate is also at 255)
Please refer to the Strobe Duration Detail
Strobe rate slow to fast.
White light mode (when strobe duration is also at 255)
Please refer to the Strobe Rate detail.
Intensity
Strobe Duration
Strobe Rate
2
3
14
ProTron LED