Filter
Top Products
Table 6 provides DMX channel mapping of all DMX512 control values when the LED ProTron Luminaire is in 16-Bit
Mode (as set by the luminaire’s menu system).
Table 6: LED Luminaire DMX Channel Mapping (16-Bit Control Mode)ProTron
4. 16-Bit Mode
1
16 bit control for Intensity of LED settings.
2
3
Controls strobe operations as follows . . .
No Effect
= DMX 0 - 5
Ramp Up
= DMX 6 - 42
Ramp Down
= DMX 43 - 85
Ramp up/down
= DMX 86 - 128
Random
= DMX 129 - 171
Top row only
= DMX 172 - 173
Bottom row only
= DMX 174 - 175
Left zone only
= DMX 176 - 179
Right zone only
= DMX 180 - 182
Checker pattern A
= DMX 183 - 184
Checker pattern B
= DMX 185 - 186
Random zones
= DMX 187 - 214
Circle zone chase clockwise
= DMX 215 - 235
Circle zone chase counter-clockwise
= DMX 236 - 255
4
Control Channel
5
Strobe's duration,Range is 0-255
White light mode (when strobe rate is also at 255)
Please refer to the Strobe Duration Detail.
6
Strobe rate slow to fast.
White light mode (when strobe duration is also at 255)
Please refer to the Strobe Rate detail.
Instensity High
Instensity Low
Effects
Strobe Duration
Strobe Rate
0-100%
0-100%
0-100%
0-100%
0-100%
0-100%
0-65535
0-255
0-255
0-255
0-255
0-255
0
DMX 0
0
0
0
Functions of the E Series products. Set control
channel value to desired action,Hold value for at
least 5 seconds ,then turn to 0.
Set control channel value to 0 without any scaling.
Default Setting on Console = DMX 0-4
Dimming Curve_linear = DMX 30 - 34
Dimming Curve_Square = DMX 35- 39
Dimming Curve_S-Curve = DMX 40 - 44
Dimming Curve_PL-Curve = DMX 45 - 49
The following is only available for "Zones Mapping" protocol
The following is instantly active and does not require the 5
second hold:
Combined zone control-(all zones follow zone 1 setting)
= DMX 100 - 104
Reserves( Future use) = DMX 105 - 250
16
ProTron LED