Filter
Top Products
Infant Insert (optional):
When using insert (A),
make sure insert does not
cover your infant’s face in
any way. Remove the insert
for older babies and
toddlers.To remove the
insert, unthread the
harness from harness
bracket (see belt-
positioning booster
section), remove insert, and
rethread harness. Reverse
to replace insert.
Harness Covers (optional): Harness covers (B) help
provide comfort to the neck. For Harness Covers to fit
correctly, you may have to fit the upper ends of the
covers through the harness slots. Removal is the same as
for the infant insert.
WARNING:
!
Make sure metal bar
is locked into
position. Failure to
do this can result in
serious injury or
death.
8
Rotate headrest/harness
adjusting levers in. Move
headrest up or down to
adjust. Make sure headrest
is locked into place.
NOTE: The highest
position is for belt-
positioning use only.
A
B
14
Securing Your Child in the Child
Restraint; Puzzle Buckle Plates
1
Fit top buckle plate over
bottom buckle plate. The
connection should be flat.
Position harness straps over
the child’s shoulders.
2
Hold latch plates together
with one hand and buckle
with the other. Push latch
plates into buckle until you
hear a “click.” Pull up on
harness to make sure
buckle is locked.
3
15
continued on next page.
9
NOTE: Depending on your model, follow the
unbuckling and buckling steps that matches your buckle
plates.
4358-3340A Instrctions 11/15/04 9:18 AM Page 17