Filter
Top Products
16
WARNING:
Failure to fasten and tighten the harness
system correctly and snugly can result in
serious injury or death.
5
Position the harness
retainer at mid-chest (even
with arm pits), away from
the child’s neck.
6
Snap the harness retainer
together.
7
Pull on harness adjustment
strap to tighten harness
snugly.
NOTE: A snug strap
should not allow any slack.
It lies in a relatively
straight line without
sagging. It does not press
on the child’s flesh or push
the child’s body into an
unnatural position.
!
Securing Your Child in the Child
Restraint; Dual Buckle Plates
NOTE: Depending on your model, follow the
unbuckling and buckling steps that matches your buckle
plates.
1
Position harness straps over
the child’s shoulders.
Push each buckle plate into
buckle until you hear a
“click”. Remember to
always pull up on harness
straps to make sure buckle
is locked tightly.
2
3
Pull on harness adjustment
strap to tighten harness
snugly.
NOTE: A snug strap
should not allow any slack.
It lies in a relatively
straight line without
sagging. It does not press
on the child’s flesh or push
the child’s body into an
unnatural position.
17
4358-3340A Instrctions 11/15/04 9:18 AM Page 19