Filter
Top Products
12
5
Place the child’s bottom
and back flat against the
child restraint. This will
increase comfort and allow
the harness to properly
tighten.
13
Harness
Guide
6
Check Harness Height
Forward-Facing
Position: Harness guide
must be
even with or
just above the shoulders.
If the top harness guides
are below the child’s
shoulders, the child
weighs at least 40 lbs. (18.1
kg) and is over 1 year old,
convert the seat to a belt-
positioning booster.
7
Determine which set
of harness guide slots
works best for your child.
Adjust if needed.
To change harness
location:
From the back of the seat,
remove harness from
splitter plate.
Pull harness through the
harness guides from the
front.
Rethread harness into new
harness guide location.
Refasten harness to
splitter plate. Make sure
harness does not twist.
WARNING
!
Failure to reattach the harness correctly
can result in serious injury or death.
8
9
Pull pad off corner. Hook
bottom of cup holder
on bottom edge of child
restraint and rotate cup
holder up.
Install Cup Holder
(on select models)
Snap top of cup holder on
top edge of child restraint.
Make certain cup holder is
flush on the top and sides
of child restraint. Replace
pad.
1
2