Filter
Top Products
17
Removing Your Child From the
Child Restraint
Press on release button
and pull apart.
2
1
Loosen harness by pushing
down on the harness
release lever while pulling
out on the harness.
Press red button on
buckle to release the
buckle plates. Place
harness over sides of child
restraint. Remove child.
3
16
Choosing LATCH or Vehicle Belts
The LATCH System
Anchor bars
Vehicle Belts
If LATCH is not an
option, you will use
your vehicle’s belts. In
most cases you will use
the lap/shoulder belt
combination. There are
some vehicle belts that
will not work with a child
restraint or will require
special attention. See
next page for specific
instructions.
LATCH means Lower
Anchors and Tethers for
CHildren. Not all vehicles
manufactured before
September 2002 were
equipped with LATCH.
The LATCH system
allows a child restraint to
be secured in the vehicle
without using the vehicle
belt system and can ONLY
be used in vehicles that
have the anchor bars
installed.
Check your vehicle
owners manual to see
which seating positions
may be equipped with the
LATCH system.