Filter
Top Products
With knee still in child
restraint, attach hook to
anchor in vehicle. Push
down firmly and tighten
top anchorage strap.
To adjust top anchorage
strap: See “Adjusting Top Anchorage Strap” section.
NOTE:
If your vehicle does not have an anchor
bracket, tuck the top anchorage strap’s hook under
the child restraint.
23
Forward-Facing Installation with
Vehicle Belts:
1
2
3
Connect and tighten
harness straps prior to
installing in vehicle.
Place child restraint flush
against the back of the
vehicle seat forward-
facing in the back seat.
Thread the vehicle lap
belt or lap/shoulder belt
combination through the
belt path and out other
side. Buckle.
Place one knee in the
child restraint and push
down firmly while pulling
up on belt to tighten. For
a manual belt, refer to
“Knowing your Vehicle
Belt” section.
With weakest hand
at belt path, tilt and
push the child restraint
forward and back, and
from side to side. If the
seat belts do not loosen,
your child restraint
should be secure.
NOTE: Some “play”
from front to back or
about an inch from side
to side is acceptable. If
it moves more, review
“Knowing Your Vehicle
Belts” and “The Locking
Clip” sections.
4
WARNING
!
After checking for hot
seat and buckles, place
your child in the child
restraint as described
in the “Securing Your
Child in the Child
Restraint” section.
5
Using this child restraint in any vehicle
seat where the lap belt cannot be
tightened securely and properly or
where it can be loosened by pulling on
it can result in serious injury or death.
Forward-Facing Use: 22-40 lbs. (10.1-18 kg), 34-43” (85.1-110 cm), Over 1 year of age.
22