Filter
Top Products
43D-Link DAP-2690 User Manual
Section 3 - Configuration
DHCP Server > Static Pool Setting
Function Enable/
Disable:
Dynamic Host Configuration Protocol (DHCP) assigns
IP addresses to wireless devices on the network.
This protocol simplifies network management and
allows new wireless devices to receive IP addresses
automatically without the need to manually assign IP
addresses. Select Enable to allow the DAP-2690 to
function as a DHCP server.
Enter the name of the host computer in this text box.
The DHCP address pool defines the range of IP addresses that can be assigned to stations on the network. A static pool allows specific
wireless stations to receive a fixed IP without time control.
Once a user is finished, click the Save button to let the changes take effect.
Host Name:
Use the Static Pool Settings to assign the same IP
address to a device every time you start up. The IP
addresses assigned in the Static Pool list must NOT
be in the same IP range as the Dynamic Pool. After
you have assigned a static IP address to a device via
its MAC address, click Save; the device will appear in
the Assigned Static Pool at the bottom of the window.
You can edit or delete the device in this list.
Enter the MAC address of the device requesting
association here.
Define the subnet mask of the IP address specified in
the “IP Assigned From” field.
Assigned MAC
Address:
Subnet Mask:
Assigned IP: