Filter
Top Products
31D-Link DAP-2690 User Manual
Section 3 - Configuration
Multi-SSID
The device supports up to eight multiple Service Set Identifiers. You can set the Primary SSID in the Basic > Wireless section. The SSID’s
factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless network or to establish a new wirelessThe SSID can be easily changed to connect to an existing wireless network or to establish a new wireless
network. When the information for the new SSID is finished, click the Add button. Click the Save button to let your changes take effect.
Check to enable support for multiple SSIDs.
Check to enable the priority feature.
This read-only value is the current band
setting.
You can select up to seven multi-SSIDs. With the
Primary SSID, you have a total of eight multi-
SSIDs.
Enable Multi-SSID:
Enable Priority:
Band:
Index:
SSID Visibility:
Enable or Disable SSID visibility. Enabling
this feature broadcasts the SSID across the
network, thus making it visible to all network
users.
SSID:
Service Set Identifier (SSID) is the name
designated for a specific wireless local area
network (WLAN). The SSID’s factory default
setting is dlink. The SSID can be easily changed
to connect to an existing wireless network.
The Multi-SSID security can be Open System,
WPA-Personal, WPA-Enterprise, or 802.1X.
For a detailed description of the Open System
parameters please go to page 23. For a detailed
description of the WPA-Personal parameters
please go to page 24. For a detailed description
of the WPA-Enterprise parameters please go
to page 25. For a detailed description of the
802.1X parameters please go to page 26.
Security: