Filter
Top Products
15D-Link DAP-2690 User Manual
Section 3 - Configuration
Home > Basic Settings > Wireless
Select Access Point from the drop-down menu.
The other three choices are WDS with AP, WDS,
and Wireless Client.
Service Set Identifier (SSID) is the name
designated for a specific wireless local area
network (WLAN). The SSID’s factory default
setting is dlink. The SSID can easily be changed
to connect to an existing wireless network or to
establish a new wireless network. The SSID can
be up to 32 characters and is case-sensitive.
Enable or Disable SSID visibility. Enabling this
feature broadcasts the SSID across the network,
thus making it visible to all network users.
Mode:
Network Name
(SSID):
SSID Visibility:
Wireless Band:
Select either 2.4 GHz or 5 GHz from the drop-
down menu.
In Access Point mode, the DAP-2690 functions as a wireless AP. After completing the desired settings, click the Save button to let your
changes take effect.
Access Point mode
Enabling this feature automatically selects the
channel that provides the best wireless performance. Enable is set by default. The channel selection process only
occurs when the AP is booting up.
All devices on the network must share the same channel. To change the channel, first toggle the Auto Channel
Selection setting to Disable, and then use the drop-down menu to make the desired selection. (Note: The wireless
adapters will automatically scan and match the wireless settings.)
Auto Channel
Selection:
Channel: