Filter
Top Products
LED Indicators
6 Gbps SAS I/O module 14 one-color LED status indicators, four each for
the three SAS ports, and two for the module status
Fan module
• One single-color LED indicator for module
status
• One single-color LED indicator for battery fault
status (not currently used)
• One single-color LED indicator for fan fault
status
• One single-color LED indicator for power
status
PSU
• One single‐color LED indicator for PSU fault
status
• One single‐color LED indicator for AC fault
status
• One single‐color LED indicator for power status
Power Supply Units (per PSU)
Watt 2.8 kW
Voltage 200–240 VAC (8.6 A–4.3 A)
Heat dissipation 191–147 W
Maximum inrush current Under typical line conditions and over the entire
system ambient operating range, the inrush current
may reach 55 A for each PSU for 10 ms or less.
Available Hard Drive Power (Per Slot)
Supported hard drive power consumption
(continuous)
Up to 1.16 A at +5 V, Up to 1.6 A at +12 V
I/O Card Power (Per Slot)
Maximum power consumed by I/O Card 11 W at +12 V
Maximum available power 100 W at +12 V
Maximum available power 1 W at +5 V (standby)
Physical
Height 22.23 cm (8.75 inches)
Width 48.26 cm (19 inches)
28