Filter
Top Products
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switches: M8024-k, 8024, and 8024F
42
3. Enter the IP address of the TFTP server into the Server Address field, and enter the name of
the Firmware file into the Source File Name field.
4. If not in the root directory of the TFTP server, enter the path of the firmware file.
5. Click Apply.
The dialog box below will appear after a short period stating that the transfer is complete.
6. Click Close.
7. Select System > File Management > Active Images.
Notice that the firmware (i.e. 4.2.0.4) was copied into the inactive image for each member.