Filter
Top Products
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switches: M8024-k, 8024, and 8024F
17
Configuring the Cisco 5000 series switch with firmware ver 5.x for a single
connection from the Dell PowerConnect M8024-k or 8024()(F)
The CLI commands below are necessary for an un-configured Cisco 5020. The CLI will show additional
lines that are either default or can’t be changed and are not added for this example. The CLI will also
show the lines in a different order after they have been entered.
Appendix-A Cisco Nexus 5548UP CLI
example will have a copy of the full configuration for a 5548UP for reference.
Command-Line Interface Method
Sample CLI for Cisco Nexus 5020 (can be copied and pasted) Figure 10.
feature fcoe
feature npiv
feature telnet
feature lacp
feature lldp
system default switchport trunk mode auto
vlan 20
vlan 1000
fcoe vsan 2
vsan database
vsan 2
vsan 2 interface vfc1
vsan 2 interface fc2/1
interface vfc1
bind interface Ethernet1/1
no shutdown
interface fc2/1
switchport trunk mode auto
no shutdown
interface Ethernet1/1
switchport mode trunk
switchport trunk native vlan 20
switchport trunk allowed vlan 1000
zone name blade1 vsan 2
member interface fc2/1
member pwwn xx:xx:xx:xx:xx:xx:xx:xx
zoneset name set1 vsan 2
member blade1
zoneset activate name set1 vsan 2