Filter
Top Products
EN-67
English
Reference
One of the error messages below appears on the display when a problem occurs.
• To clear an error message and return to the normal display, touch bo EXIT on the display.
Error Messages
Display Message Cause Action
No Media 1. The USB flash drive is not connected to the
Digital Keyboard’s USB flash drive port.
1. Correctly plug the USB flash drive into the USB
flash drive port.
2. The USB flash drive was removed while some
operation was in progress.
2. Do not remove the USB flash drive while any
operation is in progress.
3. The USB flash drive is write-protected. 3. Unprotect the USB flash drive.
4. The USB flash drive has anti-virus software. 4. Use a USB flash drive that does not have anti-
virus software.
No File There is no loadable file or no playable file in the
“MUSICDAT” folder.
Move the file you want to load or play into the
appropriate location (pages EN-63, EN-64) in the
“MUSICDAT” folder.
No Data You are attempting to save user data (user preset,
user rhythm, MIDI data, etc.) when there is no data
to save.
Select a user data item for which there is data to
save.
Read Only A read-only file with the same name you are trying
to use is already stored on USB flash drive.
• Change the name and then save the new data.
• Remove the read-only attribute from the existing
USB flash drive file and overwrite it with the new
data.
• Use a different USB flash drive.
Media Full There is not enough space available on the USB flash
drive.
Delete some of the files on the USB flash drive to
make room for new data (page EN-64) or use a
different USB flash drive.
Too Many Files 1. There are too many files on the USB flash drive. 1. Delete some of the files on the USB flash drive to
make room for new data.
2. There is a file named TAKE99.WAV in the
“MUSICDAT” folder.
2. Delete the WAV file in the “MUSICDAT” folder.
Not SMF01 You are attempting to play back SMF Format 2 song
data.
This Digital Keyboard supports playback of SMF
Format 0 or Format 1 only.
Size Over 1. The MIDI recording data on the USB flash drive
cannot be played because it is too big.
1. The Digital Keyboard supports playback of MIDI
recording data up to approximately 700KB.
2. The SMF file on the USB flash drive cannot be
played because it is too big.
2. The Digital Keyboard supports playback of SMF
files up to 320 KB.
3. The data you are trying to import cannot be
imported because it is too big.
3. The Digital Keyboard supports import of data
(per item) up to the maximum sizes shown
below.
User Rhythms: Approximately 64 KB
User Presets: Approximately 6 KB
Wrong Data 1. The USB flash drive data is corrupted. —
2. USB flash drive contains data that is not
supported by this Digital Keyboard.
Memory Full 1. There is not enough Digital Keyboard memory
available to convert a MIDI recorder song to SMF
data and store it on the USB flash drive.
1. Reduce the size of the song data.
Example:
Delete any tracks that are not required.
2. There is not enough memory remaining for
pattern sequencer operation.
2. The maximum allowable size of data that can be
written by the pattern sequencer (per user
rhythm) is approximately 64 KB.
3. Remaining memory became too low during
music preset editing.
3. The Digital Keyboard supports input of
approximately 1,000 chords.
Format Error 1. The USB flash drive format is not compatible
with this Digital Keyboard.
1.
Format the USB flash drive on the Digital
Keyboard.
2. The USB flash drive is corrupted. 2. Use a different USB flash drive.
Media Error The USB flash drive is corrupted. Use a different USB flash drive.
MZX300_X500-ES-1A.indd 69 2015/10/07 15:46:52