Filter
Top Products
33
Cover Removal
Remove the infant body pillow.1
Loosen the harness by lifting the harness adjuster 2
lever while pulling both shoulder straps forward
as far as possible.
Unhook the shoulder straps from the harness 3
yoke on the rear of the child seat (Fig. E).
Pull the upper harness straps through the head 4
restraint and cover to the front of the child seat.
Remove the buckle and belly pad. See page 35.5
Remove the head restraint portion of the cover. Be careful not to 6
damage the energy-absorbing foam.
Remove the energy-absorbing foam from the head restraint and set 7
aside.
Gently remove the upper portion of the cover by pulling it around the 8
head restraint to the front.
Pull the lower harness straps, buckle tongues, HUGS9
™
chest pads, and
chest clip through the lower slots in cover.
Remove the entire cover from the child seat.10
Care and Maintenance
e
WARNING! Do not take apart the harness. Never remove the
buckle tongues from the harness. They cannot be reattached after
removal. If reassembled incorrectly, the child seat may not perform as
intended.