Filter
Top Products
30
31
How to Adjust Harness Slot Height
IMPORTANT: See Important Harness Adjustments
on pages 6 – 7 for important instructions on proper
harness fit based on your child’s height and weight.
Loosen the harness by pressing the harness-1
adjuster release button while pulling the harness
straps forward as far as possible (Fig. C).
From the rear of the child seat, unhook the 2
harness straps from the harness yoke (Fig. D).
Pull upper harness straps through the shell, foam, 3
and cover to the front of the child seat.
Thread the harness straps through the appropriate 4
harness slots in the cover, foam, and child seat
shell (Fig. E).
Reattach harness straps to the harness yoke (Fig. 5
D).
Pull harness adjuster strap to tighten the harness.6
Verify all harness straps are threaded at the same 7
height and are not twisted.
Securing Your Child
Loosen the harness by pressing the harness adjuster 1
release button located on the front of the child
seat, then pull the harness straps forward (Fig. C).
Release the chest clip by squeezing the tabs and 2
sliding pieces apart (Fig. F).
Unfasten the harness buckle by pressing the release 3
button and sliding the tongues out.
Move the harness straps to the side of the child 4
seat.
Use the harness holder located on the straps and side of the cover to aid •
in holding the straps.
Place child in the child seat.5
Harness Buckle
Fastening the Harness Buckle
Hold the harness buckle with one hand.1
Use the other hand to insert one buckle 2
tongue at a time into the harness buckle
(Fig. A).
A proper connection is confirmed with a positive •
click after inserting each buckle tongue.
Releasing the Harness Buckle
Brace the rear of the harness buckle with 1
one hand.
Use your thumb to press the release button 2
and slide both buckle tongues to remove
from the buckle (Fig. B).
IMPORTANT: Periodically clean the harness buckle to ensure safe
operation. See page 36.
Child Seat Functions
x 2
x 2
A
x 2
x 2
b
Child Seat Functions
c
f
d
e