Using the Buckle
Fastening the Buckle
1 Hold the buckle with one hand.
2 Use your other hand to insert one
tongue at a time into the buckle. Proper
connection is confirmed with a positive
click after inserting the second buckle
tongue.
Releasing the Buckle
1 Brace the rear of the buckle with hand.
2 Use thumb to press release button until
tongues are ejected from buckle.
NOTE: Periodically clean the buckle to ensure proper operation.
See
section Cleaning the Buckle on page 38.
Using the Chest Clip
Open the chest clip by squeezing
the middle tabs, then pulling the
two pieces apart.
IMPORTANT: The correct height
for the chest clip is at the middle of
the chest, level to the armpit.
Always make sure that the harness
is tight before each use or after any
adjustments.
30
FAGalaxy_page proof 2/9/02 11:17 AM Page 30