Britax Car Seat Car Seat User Manual


 
Installation: Forward Facing
19
6 With one hand, push the child
restraint firmly into the vehicle seat
while pulling the first LATCH con-
nector strap tight (fig E).
7 Continue pressing child restraint
firmly into the vehicle seat while
pulling the second LATCH connec-
tor strap tight.
8 Attach Versa-Tether
as instructed
on pages 25
-
26. Forward facing
installation is improved by the use
of the Versa-Tether
, but is not
required.
9 Verify that all connections are
tight and the child restraint is secure.
Removal
To remove the child restraint,
release both LATCH connectors
from the LATCH anchors by
pressing the red button.
If connected, disconnect the Versa-Tether
from the tether anchor.
Always store LATCH connectors when not in use by attaching to
storage rings on the side of the child restraint.
E
D
FAGalaxy_page proof 2/9/02 11:17 AM Page 19