Filter
Top Products
PAGE 2
DO NOT USE Models CX242DDWT, CX302DDWT, CX24BD2SPD,
CX30BD2SPD, CX36BD2SPD WITH ANY SOLID STATE VARIABLE SPEED
CONTROL DEVICE (RHEOSTAT).
Use this unit only in the manner intended by the manufacturer. If you have any
questions, contact the manufacturer.
Before servicing or cleaning this unit, switch the power off at the service panel and
lock out to prevent power from being switched on accidentally.
Installation work and electrical wiring must be done by qualified people in
accordance with all applicable codes and standards, including fire-rated
construction.
Sufficient air is needed for proper combustion and exhausting of gasses through
the flue (chimney) of fuel burning equipment to prevent back-drafting. Follow the
heating equipment manufacturers' guidelines and safety standards such as those
published by the National Fire Protection Association (NFPA) and the American
Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE) and
local code authorities.
When cutting or drilling into walls or ceilings, do not damage electrical wiring and
other hidden utilities.
To avoid injury from fiberglass insulation, wear long sleeves, rubber gloves,
goggles, and a respirator mask both in the attic and below when cutting and
removing sheet rock from the shutter opening.
PLEASE READ AND SAVE
THESE INSTALLATION INSTRUCTIONS
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY, OBSERVE THE FOLLOWING:
This fan is intended for general ventilating use only. Do not use it to exhaust
hazardous or explosive materials or vapors.
This unit has an unguarded impeller. Do not use in locations easily accessible to
people or animals.
Do not operate fan when a fire is burning in the fireplace.
CAUTION
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
THIS FAN IS INTENDED FOR RESIDENTIAL USE ONLY