P/N: 4PFX020-010
©2004 Paxton Automotive Corp.
All Rights Reserved, Intl. Copr. Secured
28JUL04 v1.2(Univ.SBF Carb-4PFX v1.2)
Section 8
AIR DUCTING INSTALLATION
8.1 AIR DUCTING INSTALLATION
A. Install the supplied air filter onto the super-
charger inlet. Orient for maximum clearance
and tighten clamp.
B. Install the four-bolt flange adapter and gasket
onto the enclosure cover using the 5/16-18
socket head cap screws.
Fig 8-a / Passenger side discharge tube.
(64-68 Mustang)
Fig 8-b / Driver side discharge duct.
(64-68 Mustang)
8-1
C. Install the correct sleeves and clamps on each
end of the discharge duct. Slide one end of the
discharge duct onto the supercharger and the
other end onto the enclosure adapter.
*** NOTE ***
On applications where the discharge of the
supercharger does not line up, try loosening the
mounting bracket bolts that go into the head, re-
position supercharger and tighten all bolts.
Fig 8-c / Passenger side discharge duct.
(1969 351 Mustang)
D. Install the supplied bypass valve onto the
discharge duct. Install the supplied filter onto
the bypass valve discharge. Orient the bypass
valve for maximum clearance (check with
hoop closed).
Fig 8-d / Driver side discharge duct
(1969 351 Mustang)
