P/N: 4PFX020-010
©2004 Paxton Automotive Corp.
All Rights Reserved, Intl. Copr. Secured
28JUL04 v1.2(Univ.SBF Carb-4PFX v1.2)
2.1 PREPARATION/REMOVAL
Section 2
PREPARATION/REMOVAL
A. Disconnect the negative lead of all batteries.
B. Loosen all nuts and bolts that are used to
tension the alternator and power steering
pump V-belts.
C. Remove all of the belts from the accessories.
D. Remove the stock crank pulley.
E. Remove any accessories that are mounted on
the front of the head that the supercharger will
be mounted on.
*** NOTE ***
If you have not changed spark plugs in the last
15,000 miles do so prior to the installation of this
kit.
F. If the ignition coil is mounted on top of the
intake manifold, it will need to be relocated to
the front of the engine for carburetor enclosure
clearance.
*** NOTE ***
If you are installing a universal supercharger kit,
some of the following instructions may not apply
or may require custom fabrication.
2-1
