ParaBody 893104 Manual

next previous

FIGURE 3

STEP 3:

• LOOSELY assemble the FRONT UPRIGHTS (5) to the UPRIGHT SUPPORT (4) using four 1/2 X 4” BOLTS (37), four 1/2” WASHERS (43),

and four 1/2” LOCKNUTS (44) as shown in FIGURE 3.

• Insert four 2” SQ. END CAPS (22) & two 3 X 2” END CAPS (19) to the ends of the FRONT UPRIGHTS (5) as shown in FIGURE 3.

345

1/2 1/2 1/2 1/2 1/2 1/2

1/2 X 4” 37

FIGURE 2

STEP 2:

• Attach two NON-SKID STRIPS (24) to the FOOT

PLATE (6) as shown in FIGURE 2.

• Assemble two 13-1/2 X 1-5/8” RUBBER STRIPS (25) to the bottom of the FRONT UPRIGHTS (5) as shown in FIGURE 3.