ParaBody 893104 Manual

next previous

• Wrap the CABLE (18) around one 3-1/2” PULLEY (16) and LOOSELY assemble it to the 3/16 X 1-3/4 X 5-1/4” PLATES (28) using one

3/8 X 2” BOLT (31), two 3/8” WASHERS (40), and one 3/8” LOCK NUT (42). See FIGURE 13.

STEP 12:

FIGURE 12

• Route the end of the second CABLE (18) through the slot of the UPRIGHT FRAME (2) then SECURELY assemble one 4-1/2”

PULLEY (17) to the UPRIGHT FRAME (2) using two 3/8 X 2-3/4” BOLTS (32), two 3/8” FLANGE SPACERS (39), two 3/8” WASH-

ERS (40), and two 3/8” LOCK NUTS (42). (NOTE: The CABLE (18) should be routed between the pulley and the retaining bolt as

shown in FIGURE 12.)

STEP 13:

FIGURE 13

32 3/8 X 2-3/4”

31 3/8 X 2”