A SERVICE OF

logo

FIGURE 8
STEP 8:
¯
Route threaded end of the LAT CABLE (15) around the one of the PULLEYS in PLATE & PULLEY ASSEMBLY (17)
through the holes in the TOP BOOM (2) as shown in FIGURE
SECURELY assemble two 3-1/2" PULLEYS (12) to the TOP BOOM (2) using two 3/8 X 2-3/4" BOLTS (25), figur
FLANGE SPACERS (33), and two 3/8" LOCKNUTS (32). See FIGURE 8. (NOTE: BEFORE TIGHTENING, MAKE
CABLE (15) IS IN TIlE GROOVES OF TIlE PULLEYS.)