A SERVICE OF

logo

FIGURE 11
STEP 11:
¯ Route the threaded end of the LOW ROW CABLE (16) around the bottom PULLEY of the PULLEY & PLATE ASSEMBLY (17)
as shown in FIGURE 11.
STEP 12:
Screw the threaded end of the LOW ROW CABLE (16)
approximately 3/4" into the end ofthepost on the
WEIGHT STACK BASE (7) and tighten jam nut securely.
See FIGURE 12.
SECURELY tighten the BOLTS in the PULLEY &
PLATE ASSEMBLY (17) as shown in FIGURE 11.
FIGURE 12
0
1
2
1/2
"[
3
11