ParaBody 841101 Manual

next previous

I FIGURE 6

STEP 6:

Insert two 2 X 3" END CAPS (34) into the TOP BOOM (2) as shown in FIGURE

Route threaded end of the LAT CABLE (15) through the TOP BOOM (2) as shown in FIGURE

SECURELY assemble two 3-1/2" PULLEYS (12) to the TOP BOOM (2) using two 3/8 X 2-3/4" BOLTS (25), four

FLANGE SPACERS (33), and two 3/8" LOCK NUTS (32). See FIGURE 6. (NOTE: BEFORE TIGIITENING, MAKE

CABLE (15) IS IN TIlE GROOVES OF TIlE PULLEYS.)

¯ Insert two GUIDE ROD BUSHINGS (20) into the BUSHINGS of the TOP BOOM (2) as shown in FIGURE

STEP 7

LOOSELY assemble two 3-1/2" PULLEYS (12) to two 1-3/4"

5-1/4" PLATES (17) using two 3/8 X 2" BOLTS (24) and 3/8"

LOCK NUTS (32) as shown in FIGURE

FIGURE 7

~3/8 X 2"

1 2 3

1/2