2-36 Issue 1 June 2000
6. If the dial plan changed with the addition of a new number in front of the
extensions (change in range) and the system is a Release 3 IP42 or later,
change the AUDIX subscriber mailbox extensions. See “Using the
Change Extensions Command,” on page B-1.
NOTE:
The change subscriber extensions command does not change the
automated attendant numbers.
7. Determine your next step:
■ If the system has the Call Accounting System (CAS) software,
continue with Task 15, “Change the CAS Switch Assignment”.
■ If the system does not have CAS, continue with Task 16, "Clear any
Alarms" on page 2-37.
Task 15 - Change the CAS Switch Assignment
If the system has CAS, change the switch type.
NOTE:
The CAS PBX KTX 80 diskette has information for both the System 25 and
the MERLIN LEGEND integrations.
1. Starting at the Lucent INTUITY Administration menu, select:
2. Change the Call Reporting field to the correct switch type.
3. Press (Cancel) until you return to the Lucent INTUITY Administration
menu.
4. Continue with Task 16, “Clear any Alarms”.
> Edit CDR Collection Information
> CDR Configuration Menu
> Call Accounting System
F6
