14
14.2 Loading Documents for Specific Applications
14-6
Appendix Chapter 14
14.2 Loading Documents for Specific Applications
The most appropriate document feed method and copy settings for specific
applications are described below.
For details on specifying the various copy settings, refer to “Basic Copy Operations”
on page 3-1.
Description of the Table
1. Shows how the document should be positioned (page 2-44)
2. Shows the finished copy
3. Shows the selected Output setting (1 Staple, 2 Staples or Hole Punch)
(page 3-8)
4. Shows the selected Margin setting from the Orig Ö Copy screen if a margin is
specified for the document (page 3-27)
5. Shows the selected File Margin setting from the Application screen if a binding
margin is specified for the copy (page 7-8)
6. Shows the stapling or hole-punching position that must be selected (page 3-12)
* A dash (–) indicates that no setting should be selected.
Single-Sided Document Ö Single-Sided Copy
Original Direction Finished Copy Output
Setting
Margin
Setting
(Orig Ö
Copy
Screen)
File
Margin
Setting
(Applica-
tion
Screen)
Output
Position
1 Staple ———
1
234 5 6
1
2
Turn
the
page
