3
3.6 Selecting a Paper/Size Setting
3-22
Basic Copy Operations Chapter 3
5 Select the type of paper
to be loaded.
6 Touch [Enter].
To set a non-standard (custom) paper size
Non-standard-sized paper can be loaded into the 1st drawer or the bypass tray.
If non-standard-sized paper is loaded, it will be necessary to enter the paper size.
The following procedure describes how to specify the size of non-standard paper
loaded into the 1st drawer.
1 Touch [Paper/Size].
A screen appears, showing the available Paper/Size settings.
2 Touch the key for the 1st drawer, and then touch [Change Size].
❍ For the bypass tray, touch [Bypass].
The Size Input screen appears.
3 Touch [Custom Size].
The Custom Size
screen appears.
4 Make sure that [X] is selected.
5 Touch and to select the length of side X for the paper that is loaded.
❍ Touch [X] until the cursor moves below the digit that you wish to change.
