A SERVICE OF

logo

Open as PDF
next previous
10
10.9 Setting the “Gradation Adjustment” Function
10-68
Utility Mode Operations Chapter 10
7 After the test pattern is
printed, a screen
appears, indicating how
the test pattern must be
loaded.
8 Place the printed test
pattern on the original
glass.
❍ Align the edges of
the printed test
pattern with the
document scales.
9 Place into the 1st drawer 10 more sheets of blank paper of the same size as the
printed test pattern page.
10 Close the original cover, or the reverse automatic document feeder if it is
installed.
11 Press the [Start] key.
The printed test pattern is scanned.
12 Based on the scanned image, the gradation levels are automatically adjusted.
After the gradation levels are adjusted, the Admin. Mode screen appears again.
13 Repeat steps 5 through 12 three times.
14 Touch [Exit], and then touch [Exit] in the Utility screen.
The Basic screen appears again.