12
12.1 When the Print Quality Is Low
12-2
Troubleshooting Chapter 12
12.1 When the Print Quality Is Low
Symptom Possible Cause Remedy
The printed output is too light. The copy density is set too
light.
Select a darker Density
setting. (See page 3-45.)
The paper is damp. Replace the paper. (See
page 2-26, page 2-31,
page 2-33, page 2-35.)
The printed output is too dark. The copy density is set too
dark.
Select a lighter Density setting.
(See page 3-45.)
The document was not
pressed close enough against
the original glass.
Position the document so that
it is pressed closely against the
original glass. (See
page 2-44.)
The printed output is blurry. The paper is damp. Replace the paper. (See
page 2-26, page 2-31,
page 2-33, page 2-35.)
The document was not
pressed close enough against
the original glass.
Position the document so that
it is pressed closely against the
original glass. (See
page 2-44.)
