A SERVICE OF

logo

Open as PDF
next previous
Getting Started with Your HP Notebook
Setting Up Your Computer
24 Corporate Evaluator’s Guide
2. Insert the front end of the battery into the battery compartment on the bottom of the
computer, then press the back end in until it clicks into place.
To remove the battery
1. Do one of the following:
• Plug in the AC adapter.
• Press the blue sleep button to put the computer into Standby mode. While the
computer is in this mode, you must insert the replacement battery within two
minutes of removing the discharged battery.
• Shut down the computer or put it into Hibernate mode.
2. Slide the battery’s release latch, then lift the battery out of its compartment.