Using Windows 2000
Installing Retail Windows 2000
Corporate Evaluator’s Guide 127
17. Install the TP4WIN2K.INF driver from the TRACKPNT subdirectory on the
Recovery CD.
Note
MAKE SURE YOU DO NOT ENTER THE PATH OF THE REGULAR (Windows
NT 4.0/Windows 95/Windows 98) DRIVER!!!!
18. Click OK.
19. Select IBM PS/2 TrackPoint, Click “Next”.
20. Click “Next”.
21. If the “Digital Signature Not Found” message appears, Click “Yes”. At this time,
Windows copies the TrackPoint driver files from the install disk to the system.
22. Click “Finish” to close the wizard, then click “Close”.
23. A “System Settings Changed” message should appear. Select “Yes” to restart the
computer. If you don’t see this message, restart your computer by selecting
“Shutdown” from the Start Menu.
To install Hewlett-Packard Configuration Interface (HPCI) and
HP display settings
This driver is located on the Recovery CD in the HPCI subdirectory.
The HP Configuration Interface device implements the following features:
• Undock security using the physical undock mechanism.
• Auto standby on undock based on the bios settings.
• Fn+ hibernate hot key.
• On certain systems, Volume and Mute control are implemented through the operating
system, which will actively be reflected in the user interface.
• The Rewind, Play/Pause, Stop, and FForward button controls for a music CD-ROM
on the HP notebook.
