Troubleshooting and Maintenance
Configuring the Computer
190 Corporate Evaluator’s Guide
Main Menu
Setting Description Default
BIOS Revision Shows the current version of the computer’s BIOS.
Detected
automatically.
Exp. Base BIOS
Revision*
Shows the current version of the expansion base’s BIOS.
Detected
automatically.
System Time
Sets the time using 24-hour format. Value set takes effect
immediately.
System Date
Sets the date using mm/dd/yy format. Value set takes effect
immediately.
LCD Time format*
Sets the format for displaying time on the expansion base’s
status panel.
12 Hours
LCD Date format*
Sets the format for displaying the date on the expansion
base’s status panel.
mm/dd/yy
Floppy Drive Sets the floppy drive type.
Detected
automatically.
Internal Hard Disk Displays the hard disk size.
Detected
automatically.
External Primary
Shows the hard disk drive type and capacity if one is present
in the right module bay.
Detected
automatically.
External Secondary
Shows the hard disk drive type and capacity if one is present
in the left module bay.
Detected
automatically.
Quiet Boot
When enabled, hides summary of power-on self-test and
messages during boot.
Enabled
Video Display Device
Sets whether the computer automatically switches to an
external monitor if one is detected.
Auto
Video Expansion
When enabled, the video image covers the entire display in
lower resolution modes (SVGA or VGA). When disabled, the
video image is centered in the display.
Disabled
Television Type
Controls the signal format (NTSC or PAL) output by the
S-video port when Windows is not running.
NTSC
System Memory Shows the system memory size. 640 KB
Extended Memory
Shows the extended memory size (equal to total memory
minus 1 MB).
Detected
automatically.
CPU Serial Number
For a processor with a serial number, makes the processor
serial number available to software.
Disabled
