7. MAINTENANCE AND TROUBLESHOOTING
7-10
7.7.2 Web software initialize
There are two methods to initialize (reset) the Web software: [Initialize except connect
settings] and [Initialize all]. The results differ based on which method used:
How to initialize:
1. Start Web software and login as Administrator.
2. Click [Settings] in the menu bar to show the [Settings] screen.
Item
Initialize Except
Connect Settings
Initialize ALL
Main: Satellite Search Option Yes Yes
SMS: all SMS box (SIM) No No
SMS: SMS Settings Yes Yes
Contacts: All Contacts No No
SIM: All SIM Data No No
Settings(Basic): GPS, Serial Port Yes Yes
Settings(Basic): Incoming Indicator Yes Yes
Settings(Basic): Analog Port No Yes
Settinsg(Basic): Satellite No No
Settings(Basic): OTA Yes Yes
Settings(PBX settings): Incoming Routing,
Call Limit, Group, Internal call routing, Access
code, Other setting
Yes Yes
Settings(PBX settings): Extension No Yes
Settings(Network setting): LAN IP Address,
Subnet Mask
No Yes
Settings(Network settings): LAN/DHCP No Yes
Settings(Network settings): LAN/Routing, RIP,
VRRP
Yes Yes
Settings(Network settings): WAN Yes Yes
Settings(Network settings): PPPoE Yes Yes
Settings(Password): SMS password, Log
password, Administrator password
Yes Yes
Device: Device List Yes Yes
Log: Log All Log No No
Log: System log Yes Yes
