Index
IN-21
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
78-17058-01
monitoring (continued)
traffic flowing among switches
25-1
traffic suppression 21-17
tunneling 13-18
VLAN
filters
28-40
maps 28-40
VLANs 11-14
VMPS 11-27
MQC
process
30-3
steps to configure 30-3
MSDP
benefits of
35-3
clearing MSDP connections and statistics 35-19
controlling source information
forwarded by switch
35-12
originated by switch 35-8
received by switch 35-14
default configuration 35-4
dense-mode regions
sending SA messages to
35-17
specifying the originating address 35-18
filtering
incoming SA messages
35-14
SA messages to a peer 35-12
SA requests from a peer 35-11
join latency, defined 35-6
meshed groups
configuring
35-16
defined 35-16
originating address, changing 35-18
overview 35-1
peer-RPF flooding 35-2
MSDP (continued)
peers
configuring a default
35-4
monitoring 35-19
peering relationship, overview 35-1
requesting source information from 35-8
shutting down 35-16
source-active messages
caching
35-6
clearing cache entries 35-19
defined 35-2
filtering from a peer 35-11
filtering incoming 35-14
filtering to a peer 35-12
limiting data with TTL 35-14
monitoring 35-19
restricting advertised sources 35-9
support for 1-8
MSTP
boundary ports
configuration guidelines
15-12
described 15-5
BPDU filtering
described
16-3
enabling 16-7
BPDU guard
described
16-2
enabling 16-6
CIST, described 15-3
configuration guidelines 15-12, 16-5
configuring
forward-delay time
15-20
hello time 15-19
link type for rapid convergence 15-22
maximum aging time 15-21
maximum hop count 15-21
MST region 15-13
path cost 15-18
port priority 15-17
