33-4
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
78-17058-01
Chapter 33 Configuring HSRP
Configuring HSRP
Figure 33-2 MHSRP Load Sharing
Configuring HSRP
These sections contain this configuration information:
• Default HSRP Configuration, page 33-4
• HSRP Configuration Guidelines, page 33-5
• Enabling HSRP, page 33-5
• Configuring HSRP Priority, page 33-6
• Configuring MHSRP, page 33-9
• Configuring HSRP Authentication and Timers, page 33-9
• Enabling HSRP Support for ICMP Redirect Messages, page 33-11
Default HSRP Configuration
Table 33-1 shows the default HSRP configuration.
121235
Active router for group 1
Standby router for group 2
Client 1
Router A Router B
10.0.0.1 10.0.0.2
Active router for group 2
Standby router for group 1
Client 2 Client 3 Client 4
Table 33-1 Default HSRP Configuration
Feature Default Setting
HSRP groups None configured
Standby group number 0
Standby MAC address System assigned as: 0000.0c07.acXX, where XX is the HSRP
group number
Standby priority 100
