Contents
xxviii
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
78-17058-01
Controlling Source Information that Your Switch Originates 35-8
Redistributing Sources 35-9
Filtering Source-Active Request Messages 35-11
Controlling Source Information that Your Switch Forwards 35-12
Using a Filter 35-12
Using TTL to Limit the Multicast Data Sent in SA Messages 35-14
Controlling Source Information that Your Switch Receives 35-14
Configuring an MSDP Mesh Group 35-16
Shutting Down an MSDP Peer 35-16
Including a Bordering PIM Dense-Mode Region in MSDP 35-17
Configuring an Originating Address other than the RP Address 35-18
Monitoring and Maintaining MSDP 35-19
CHAPTER
36 Troubleshooting 36-1
Recovering from Corrupted Software By Using the Xmodem Protocol 36-2
Recovering from a Lost or Forgotten Password 36-3
Procedure with Password Recovery Enabled 36-5
Procedure with Password Recovery Disabled 36-7
Preventing Autonegotiation Mismatches 36-8
SFP Module Security and Identification 36-9
Monitoring SFP Module Status 36-9
Monitoring Temperature 36-9
Using Ping 36-10
Understanding Ping 36-10
Using Ping 36-10
All Software Versions 36-11
Metro IP Access Image 36-11
Ping Responses 36-12
Summary 36-13
Using Layer 2 Traceroute 36-13
Understanding Layer 2 Traceroute 36-13
Layer 2 Traceroute Usage Guidelines 36-14
Displaying the Physical Path 36-15
Using IP Traceroute 36-15
Understanding IP Traceroute 36-15
Executing IP Traceroute 36-16
