A-1
Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter Software Configuration Guide
OL-12189-01
APPENDIX
A
Supported MIBs
This appendix lists the supported management information base (MIBs) for this release on theswitch. It
contains these sections:
• MIB List, page A-1
• Using FTP to Access the MIB Files, page A-4
MIB List
• BRIDGE-MIB
Note The BRIDGE-MIB supports the context of a single VLAN. By default, SNMP messages
using the configured community string always provide information for VLAN 1. To obtain
the BRIDGE-MIB information for other VLANs, for example VLAN x, use this community
string in the SNMP message: configured community string @x.
• CISCO-CABLE-DIAG-MIB
• CISCO-CDP-MIB
• CISCO-CONFIG-COPY-MIB
• CISCO-CONFIG-MAN-MIB
• CISCO-DHCP-SNOOPING-MIB
• CISCO-ENTITY-FRU-CONTROL-MIB
• CISCO-ENTITY-VENDORTYPE-OID-MIB
• CISCO-ENVMON-MIB
• CISCO-ERR-DISABLE-MIB
• CISCO-FLASH-MIB (Flash memory on all switches is modeled as removable flash memory.)
• CISCO-FTP-CLIENT-MIB
• CISCO-HSRP-MIB
• CISCO-HSRP-EXT-MIB (partial support)
• CISCO-IETF-IP-MIB (only the Catalyst Switch Module 3110)
• CISCO-IETF-IP-FORWARDING-MIB (only the Catalyst Switch Module 3110)
