Instruction Manual PSB-1401
7
Groups 12 Through 16 Hole Pattern
WARNING: Failure to use proper attaching hardware
and installation procedures may result in
equipment damage or serious personal
injury.
1. Lay the interface brackets out with the bent lip of each
interface bracket down (see Figure 4).
2. Open the parts bag labeled A.
3. Using the mounting buttons and hardware in the parts bag
labeled A, attach the mounting buttons in the square holes
closest to the outer edge (outside) of the interface bracket
(see Figure 4 and Figure 5).
4. Using the group number you recorded for your Large Flat
Panel display model, proceed to the applicable page in this
manual and follow the instructions for your Flat Panel Dis-
play model.
Item Description Qty.
Bracket Left 1
Bracket Right 1
Parts Bag A
10-24 x 7/8” Button Head Cap Screw 4
10-24 Ny-Lock Nut 4
Mounting Button 4
1/8” Allen Key 1
Bent Lip Down
Bent Lip Down
Figure 4. Brackets for Groups 12-16 with Bent Lip Down
Figure 5. Button Installation for Groups 12-16
