4
Instruction Manual PSB-1401
INSPECT THE BRACKETS AND
ATTACHING HARDWARE BEFORE
INSTALLING
1. Carefully inspect the interface brackets (see Figure 1) for
shipping damage.
2. If any damage is apparent, call your carrier claims agent
and do not continue with the installation until the carrier
has reviewed the damage.
PARTS
1. Read all assembly instructions before starting assembly.
2. Refer to Table 1 on page 4 and carefully inspect all parts
bags to ensure all components are contained in each bag. If
any components are missing, contact Chief Manufacturing
at 1-800-582-6480 or 952-582-6480
Table 1: Parts
Item Description Qty.
Bracket Left 1
Bracket Right 1
Parts Bag A
10-24 x 7/8” Button Head Cap Screw 4
10-24 Ny-Lock Nut 4
Mounting Button 4
1/8” Allen Key 1
Parts Bag B Nylon Spacer .75” OD x .26” ID x .375” 12
Parts Bag C M4 x 30mm Phillips Head Cap Screw 4
Parts Bag D Nylon Spacer .50” OD x .285” ID x .625” 4
Parts Bag E M5 x 35mm Phillips Head Cap Screw 4
Parts Bag F M5 x 20mm Phillips Head Cap Screw 4
Parts Bag G M5 x 25mm Phillips Head Cap Screw 6
Parts Bag H M6 x 20mm Phillips Head Cap Screw 6
Parts Bag J 1/4” Steel Washer 6
Figure 1. Brackets
