Lumex Syatems FR587W Car Seat User Manual


 
FR587W-INS-LAB-RevC13: Deluxe Extra-Wide Clinical Care Recliner Assembly and Operating Instructions
12
Upright Position
First Recline Position
(TV Position)
Second Recline Position
(Full Recline Position)
Trendelenburg Position
(Shock Position)
Info: Due to the 450 pound weight capacity (when evenly distributed) the FR587W
Recliner has two gas pistons to assist in the recline and return of the back. One
piston assists during the rearward movement of the back, the other piston assists
during the return of the back to an upright position. For this reason, in order for
the gas piston to operate properly, a person of at least 150 lb (68 kg) should be
sitting in the recliner.
Back Angle Adjustment
For added comfort, the back angle of the
Series FR577RG and FR577RGH can be adjusted
independently of the seat position. From any of
the previous positions, actuate the lever located
on the rear push handle and position the back
to desired angle. To return back to standard
position, actuate the lever and move back to
desired position.
Trendelenburg Position (Also Known as
Shock Position)
Info: This position can only be achieved by a caregiver.
Standing at the back of the recliner, grasp the
push handle with one hand while actuating the
Lever located on the rear push handle with
other. Slowly guide the back down fully until it
stops and release the lever. If the articulating
headrest is in the forward position, push back
so that it is even with the back of the recliner.
Trendelenburg Position can be obtained from
any position.
To bring recliner out of Trendelenburg, stand
at the back of the recliner and actuate the lever
shown in upper right picture. Slowly guide the
back upright and release the lever. The recliner
can then be placed in the desired position.
Lever