Filter
Top Products
7
USER INSTRUCTIONS
6.5 There are two ash panels to lie across the front of the
burner.
• Place the panel with the flat edge facing the left side of
the firebox. There are location holes on this log fitting the
screw holes on the burner.
• Place the second ash panel to the right of the first, the
pointed end of this panel fitting the V shape and fitting the
screw holes on the burner.
• Ensure that both logs are horizontal to the burner ports.
6.6 • Place log E across from the rear of log A to log C on the
right-hand side using the shaped cut-outs as location guides.
The front of the log should sit on the front ash panels and
should fit tight to log C, Diagram 13
14
AR1615
12
14
AR1614
11
14
AR1613
10
5.7 • Manoeuvre the frame under the top edge to secure in
place, Diagram 14
• Replace the six screws. Do not overtighten, Diagram 15
6.8 Single Door
• Push the door closed
•
Turn the right-hand rosette until the catch holds the door
firm
Double Door
• Push the door closed
• Turn the knob on the right door until the catch holds the
door closed
NEVER OPERATE THE STOVE WHEN THE DOOR IS
REMOVED OR WHEN THE GLASS IS BROKEN.
AR1941
15
14
AR1943
14
AR1616
13